iPad Pro 11 Gen 2 Pilot Series Cooling Case

SKU: 1854
Category: for Iphone & iPad
Manufacturers:

239.00 CHF

incl. 8,1% VAT ,

receive with purchase 239 Bonuspoints

Must be ordered. Ready for shipment in 10 days after order.
Delivery time: 11 - 12 Workdays (CH - int. shipments may differ)

iPad holder with active ventilation. Every pilot knows the problems, especially in summer, that can happen when using iPads in a hot cockpit. It always fails due to overheating when you need it most urgently. The XNAUT mount with integrated, active cooling provides more reliability in professional use.

The protective cover works with the following iPad versions:
iPad Pro 11"

Technical details:
The x-naut protective cover can be powered by the internal batteries (8 pieces AA batteries), or by a micro-USB cable. The runtime with ABtterien is over 10 flying hours, if the cooling is only sporadically activated (which is sufficient), the battery will last for almost the entire flying season (depending on usage, of course).

Battery test button to check the status of the batteries. Green means that there is still enough power available, yellow means that the power is running low and with the red LED the batteries should be changed immediately.

Very stable protective cover which also protects against shocks.
The fans are relatively quiet, calculate with 25dB.
Weight: approx. 330 gram
Compatible with all RAM Mount products
Compatible with mygoflight products via mygoflight AMP Adapter and Puck Adapter (both adapters are required).

Compatibility iPad:	iPad 10th generation iPad Air (4. Gen)iPad Air (5. Gen)iPad Pro 11" 1st gen.iPad Pro 11" 4th Gen.iPad Pro 11" 3th Gen.iPad Pro 11" 2nd gen.
Dimensions(LxWxH) ( Length × Width × Height ):	25,90 × 18,55 × 3,81 cm

There are no reviews yet.

sort by

0 Votes

Question

Is this product compatible with a iPad Air - 5th generation?

Answer the question |

Shop`s Answer

No, there is no case for the ipad air 5th generation from x-naut.

0 Votes

Question

Hallo, was ist denn der Unterschied zwischen dieser Halterung und der "XNAUT cradle with active cooling (iPad Pro 11")" (SKU 1679)? -> Ich habe ein iPad 11'' 3rd Generation. Vielen Dank.

Answer the question |

Shop`s Answer
06.02.2024

Die 1679 ist nur für die Generation 1. Diese hier ist für die Generation 2. Es steht aber beim Hersteller nichts von Generation 3. Ich habe aber mal bei RAM Mounts nachgeschaut. Da passt die passgenaue Halteschale für das iPad Pro Gen 2 auch auf die Gen 3. Somit denke ich, wäre das die richtige Schale. Natürlich können Sie, wenn es dann doch nicht passen sollte, das Produkt zurück geben.

Others also bought: